Step Hose Tail

A multi-use plastic hose tail suitable for 10mm, 13mm or 20mm flexible pipe .
It has a 1/2″ Male BSP Thread at the other end.

Fitting is simple. Push the hose pipe ends over the fitting as far as they will go, this will usually bu suffice for domestic or gravity fed water pressure.

If water pressure is high or the hose detatches from the fitting, use a jubilee clip or hose clip on  the  pipe.

The fitting can be cut to size using a hacksaw with a fine blade.
Leaving smaller tails in place will reduce the water flow but increase water pressure.