TracPipe 10m Flexible Gas Pipe Fittings and Tape Pack 22mm

TracPipe 10m Flexible Gas Pipe Fittings and Tape Pack 22mm

Stock Code: TRACBFGP2210KIT
Prod. Code: 5051303000612
MPN: 5051303000612
£141.89 (exc VAT) per each
£170.27 (inc VAT)

You Save -38%

£170.27 (inc VAT) 2022-07-06 "newCondition" GBP TRACBFGP2210KIT InStock
TRACBFGP2210KIT TRACBFGP2210KIT TracPipe 10m Flexible Gas Pipe Fittings and Tape Pack 22mm

TracPipe 10m Flexible Gas Pipe Fittings and Tape Pack 22mm

Tracpipe Flexible Gas Pipe Coil Fittings Tape Pack DN22 10m consisting of:-
10 metres x 22mm Tracpipe® flexible gas pipe
2 metres 25mm silicone tape
2 Autoflare® fittings 22mm

10m x 22mm Flexible Gas Pipe, fittings and tape packs are manufactured to specifically replace traditional gas pipework in domestic and small commercial installations.
Sometimes called Boiler Replacement Kits - there are actually three types of kits; this kit consists of a length of TracPipe, 2 autoflare fittings and Silicone Tape


Benefits to the installer
Provides a major benefit over traditional rigid piping methods by significantly reducing installation & labour time
Tracpipe can be bent by hand so no bend joints are required
Lightweight compact packs are easy to transport
No threading, welding or hot-work is needed and no special tools arerequired.
Kits can be used on natural gas or butane gas


A Tracpipe pipe pressure loss worksheet is available HERE


Jointing flexible gas pipe to fittings
Each AutoFlare fitting uses back nut and 2 split rings.
Simply slide the nut back over the cut pipe end, the two split rings will be aligned with the first corrugation of the pipe. Slide the nut forward to trap the split rings.
Align the AutoFlare fitting with the back nut and hand tighten the threads then use an appropriate spanner size to tighten the fitting until it is tight.

Extra Autoflare Fittings and Autoflare Straight Coupling Fittings are available together with a TracPipe Cutter

BSi Kitemark
All Autoflare tees are manufactured in brass they are BS 7838 Approved, Tested by Advantica and BSI Kitemarked they conform to all Gas Industry Standards in the U.K.


Gas Safe Register Please note: Tracpipe gas pipe and Tracpipe gas pipe fittings should only be installed by Gas Safe registered engineers




22mm Sizing Table
  DN22 Tube Dimensions
Size (mm) DN 22
Nominal ID (mm) 20.8
Jacket OD (mm) 28.2
Bend Radius (mm) Minimum 25.5
Recommended 76



Download the TracPipe pipe sizing app here..

Tracpipe Pipe Sizing App from Google Play

Tracpipe Pipe Sizing App from Apple AppStore

Natural Gas Propane ButaneSemi Rigid Gas PipePipe Fittings Tape Pack10m22mmBoiler Replacement KitTracpipeBS Kitemark AdvanticaBS 7838:1996
Used ForNatural Gas Propane Butane
Product TypeSemi Rigid Gas Pipe
Sub TypePipe Fittings Tape Pack
TypeBoiler Replacement Kit
brand Tracpipe
Approved ByBS Kitemark Advantica
StandardsBS 7838:1996

There are no reviews for this product yet. Be the first to add one!