Submersible dirty water pump made of stainless steel AISI 304, with double mechanical seals to ensure long life and reliability.
Suitable for dirty water systems with some solids. Applications include wastewater treatment plants and final effluent pumping, irrigation, and water displays.
Automatic version fitted with a flappy float switch. Solids handling up to 35mm.
Minimum Sump size 600mm x 600mm
Pump kicks in at 410mm and out at 180mm
Fitted with 5 metres of H07 RN-F Power supply cable

Specifications

Maximum liquid temperature: 50°C
Maximumimmersion: 10 mts
Maximum passage of solids: 35 mm
Maximum Head: 7.8 metres
Maximum Flow: 240 Litres/Min

Materials

Pump casing, impeller, cover,
casing cover and motor casing inAISI 304
Shaft in AISI 303
Double mechanical seal with interposed
oil chamber: upper in carbon/ceramic/NBR,
lower in Sic/SiC/NBR

Technical details

Asincronous 2 poles motor
Insulation class F
Protection degree IP68
1~230V ± 10% 50Hz
Permanent split capacitor and automatic thermal overload protection for single-phase version
Discharge connection 1.5″ BSP Female