Yorkshire Xpress S1R Press Fit Reducing Coupling Copper

Yorkshire Xpress S1R Press Fit Reducing Coupling Copper


Made by Pegler Yorkshire in the UK, the S1R pressfit copper reducing coupling is available in sizes ranging from 15mm up to 108mm.
 
Xpress Copper fittings are capable of operating between -24c & 110c and rated at 16 bar throughout the temperature range.


The heat-free principle of the jointing system process is one of the major benefits of the Xpress System, removing the need to apply for hot work permits which can have costly insurance implications and eliminating the possibility of flame damage.


BSi Kitemarked
BS 8537:2010 - Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes.
Pegler Yorkshire XPress range of press fittings suitable for use with hard and half-hard copper tube.


Type 1 Fittings
Ambient Temperature Range: 15°C to 95°C. Maximum Operating Pressure (MOP): 16 bar.
Available in any combination of press-end sizes: 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm,76.1mm and 108mm.

25 / 30 Years Guarantee
The Xpress Copper, Gas, Stainless ranges are guaranteed for 25 years when installed along with other manufacturers’ pipeline components conforming to the specified standard.
30 Years Where pipelines are constructed exclusively from compatible XPress Copper, Gas, Stainless and Solar fittings and tubes, the resulting installations will be deemed XPress Systems and qualify for a 30 year guarantee.

Benefits
•   A totally heat-free jointing solution
•   Reduced installation times provides major installed cost savings
•   No need for hot works permits or additional costly insurance
•   Sizes from 15mm up to 108mm
•   Systems have an exceptionally clean bore with no flux residues
•   Cover a wide variety of applications in modern building services
•   System guarantees of 30 Year for XPress Copper/Stainless and 10 Years for XPress Carbon
•   Excellent system performance from -24 to 110°C at a maximum working pressure of 16 bar and -20 to 70°C at 5 bar (1 bar within buildings) for Gas fittings
•   Designed for hydraulic system testing at up to 1.5 times working pressure, to a maximum of 16 bar*


*For testing at higher pressures and compressed air pipeline systems advice should be sought from Pegler Yorkshire