Tracpipe Gas Pipe Cut Lengths

TRACPIPE: Multiples of 5 metres are not cut into 5 metre lengths but supplied as one single length
NOTE:- If you order 2 x 5m, you will receive one continuous 10m length, if you order 5 x 5m = one 25m length, etc 

We are a leading UK TracPipe supplier. TracPipe ® is a flexible stainless steel semi-rigid gas pipe system manufactured to BS 7838. It can be installed for natural gas, propane or butane installations.
  Tracpipe Satisfies the requirements of BS 6891 for sleeved pipe

Tracpipe Guide

Tracpipe Install Guide

TracPipe ® bends by hand, needs very limited joining and dramatically reduces installation time with speed, flexibility and ease of handling and fitting. TracPipe terminates with BSP male TracPipe Autoflare Fittings

The products full range of sizes and proven reliability make it the first choice at all residential, commercial, and industrial job sites. TracPipe ® is manufactured from a stainless steel core, with a smoke and fire retardant yellow polyethylene cover. It is designed to replace traditional copper and steel rigid gas pipework, from meter to appliance.

Note on wrapping joints: Care must be taken to ensure that no stainless steel pipe is visible. Any portions of exposed stainless steel behind the fitting nut should be wrapped with the self-bonding, TracPipe Silicone Tape - TracPipe P/N FGP-915-10H-12, (25 mm wide), or FGP-915-20H12PO, (50 mm wide). This will reduce the possibility of corrosion when the pipe is in situ.