Spirax Sarco Pressure Reducing Valve DP27
1/2 Inch Spirax DP27 Pressure Reducing Valve BSP 0.2-17bar
£922.08 (exc VAT)
3/4 Inch Spirax DP27 Pressure Reducing Valve BSP 0.2-17bar
£997.70 (exc VAT)
1 Inch Spirax DP27 Pressure Reducing Valve BSP 0.2-17bar
£1,087.27 (exc VAT)
15mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£1,085.53 (exc VAT)
20mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£1,117.25 (exc VAT)
25mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£1,277.60 (exc VAT)
32mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£1,450.85 (exc VAT)
40mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£1,820.34 (exc VAT)
50mm Spirax DP27 Pressure Reducing Valve Flanged PN16 0.2-17bar
£2,000.73 (exc VAT)
Spirax Sarco Pressure Reducing Valve DP27
A pilot operated pressure reducing valve for steam or compressed air applications. Only one control spring for down stream pressure range 0.2 bar g to 17 bar g.
Externally accessible pilot filter to protect the pilot valve from pipeline dirt.
Description
All Spirax Sarco DP27, DP27E, DP27G, DP27GY, DP27R and DP27Y pilot operated pressure reducing valves have bodies manufactured using SG iron.
These products are not suitable for oxygen service.
Features
One control spring for 0.2 to 17 bar
Self-acting, no need for electrical supplies
Easy to retrofit
Fatigue tested diaphragm
Easily replaceable pilot filter
Easily serviceable
Available types
DP27 Suitable for steam or compressed air applications.
DP27E Suitable for steam applications. It incorporates an electrical solenoid valve in the pipe assembly allowing remote closure by means of a switching or timer device.
DP27G Suitable for compressed air and inert industrial gas applications. Its design incorporates a nitrile soft seal pilot and main valve. Note: it is not available with a solenoid valve.
DP27GY Suitable for compressed air, inert industrial gas and critical low-pressure control applications. Its design incorporates a nitrile soft seal pilot and main valve, and uses a lower rate control spring with a downstream pressure range of 0.2 - 3.0 bar.
DP27R This can be remotely adjusted by varying a pressure signal to the pilot diaphragm. This is usually achieved using a pressure regulator and an instrument air supply.
DP27Y Suitable for steriliser or critical low -pressure control applications. It uses a lower rate control spring with a downstream pressure range of 0.2 - 3.0 bar.
Sizes and pipe connections
Screwed BSP (BS 21 parallel) or NPT (DN15, DN20 and DN25 only).
Flanged DN15LC - Low Capacity version, DN15, DN20, DN25, DN32, DN40 and DN50.
Standard flanges:
DN15 - DN50 EN 1092 PN16 and PN25
DN25 - DN50 BS 10 Table H and ASME 300
Flanges available on request
DN15 - DN50 JIS 10/16 and ASME 150
DN15 - DN20 BS 10 Table F
DN15 ASME 300
