Polypipe Overlay Underfloor Heating End Returns

The pre-formed Polypipe plastic Return Bends are placed at the end of the Overlay Floor Panels to allow the pipe to continue down the adjacent groove.

Design Note: Please plan carefully when designing the layout for your project. Each full Overlay Panel is 600mm wide and where required, needs two Overlay end returns that are 300mm wide. You may require additional end returns depending on your room layout. Polypipe Underfloor Heating End Returns are part of the Polyplumb Overlay Underfloor Heating System

Fixing of end returns to the floor
Remove the pipe panel if not required as per your floor plan.
This should be done by using suitable screws in the screw holes of the end return panels when fixing to a wood floor, or by using Polypipe Expanding Foam Glue to bond the end returns to solid floors.