Pipe Clamps Galv Wall or Base Plate - 131

With 4 countersunk holes, this pipe clamp fitting is ideal as a flange to terminate handrail to a wall or base application. This fitting may be used on structures where it is only required as a positional fixing.
It is not recommended to use this fitting as a structural railing base

Pipe Clamp Sizing Table
 Nominal Bore of the Pipe
FittingTube Size
Outside Diameter
MetricImperial
2026.9mm203/4"
2533.7mm251"
3242.4mm321 1/4"
4048.3mm401 1/2"
5060.3mm502"

Much confusion is caused by the sizing designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube withan OD of 1 11/32" or 33.7mm
Please refer to our Sizeguide  before ordering