Pipe Clamps Galv Swivel Locating Flange - 169
Pipe Clamp Size 1 Swivel 2 Hole Flange 169-1 Galvanised
£3.69 (exc VAT)
Pipe Clamp Size 2 Swivel 2 Hole Flange 169-2 Galvanised
£3.34 (exc VAT)
Pipe Clamp Size 3 Swivel 2 Hole Flange 169-3 Galvanised
£3.95 (exc VAT)
Pipe Clamp Size 4 Swivel 2 Hole Flange 169-4 Galvanised
£4.45 (exc VAT)
Pipe Clamp Size 5 Swivel 2 Hole Flange 169-5 Galvanised
£7.36 (exc VAT)
Pipe Clamps Galvanised Swivel Locating Flange- 169
A pipe clamp ground socket cast into concrete which is flush to the finished ground level.
The upright is held in place using the grubscrew but can easily be removed without leaving any obstructions.
| Nominal Bore of the Pipe | |||
| Fitting | Tube Size Outside Diameter | Metric | Imperial |
| 20 | 26.9mm | 20 | 3/4" |
| 25 | 33.7mm | 25 | 1" |
| 32 | 42.4mm | 32 | 1 1/4" |
| 40 | 48.3mm | 40 | 1 1/2" |
| 50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with anOD of 1 11/32" or 33.7mm
Please refer to our Sizeguide before ordering
