Pipe Clamps Galv Structural Offset Side Fixing Palm - 144
Pipe Clamp Size 2 Vertical Side Support 144-2 Galvanised
£4.25 (exc VAT)
Pipe Clamp Size 3 Vertical Side Support 144-3 Galvanised
£5.60 (exc VAT)
Pipe Clamp Size 4 Vertical Side Support 144-4 Galvanised
£6.65 (exc VAT)
Pipe Clamps Galv Structural Offset Side Fixing Palm - 144
Structural offset side palm base pipe clamp fixing for fixing guardrailing to walls, steps, ramps, etc.
The tube is unable to pass through this fitting as supplied, should this be required then the base must be reamed out.
Access to the top fixing is restricted.
It is recommended that a threaded stud is fixed first with a maximum projection of 25mm.
| Nominal Bore of the Pipe | |||
| Fitting | Tube Size Outside Diameter | Metric | Imperial |
| 20 | 26.9mm | 20 | 3/4" |
| 25 | 33.7mm | 25 | 1" |
| 32 | 42.4mm | 32 | 1 1/4" |
| 40 | 48.3mm | 40 | 1 1/2" |
| 50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm
Please refer to our Sizeguide
