Pipe Clamps Galv Structural Flush Side Palm Fixing - 146
Pipe Clamp Size 2 Flush Side Palm 146-2 Structural Fix
£3.18 (exc VAT)
Pipe Clamp Size 3 Flush Side Palm 146-3 Structural Fix
£4.65 (exc VAT)
Pipe Clamp Size 4 Flush Side Palm 146-4 Structural Fix
£5.46 (exc VAT)
Pipe Clamps Galv Structural Flush Side Palm Fixing - 146
Structural flush side palm base fixing for fixing guardrailing to wall steps or ramps etc.
The flush design enables posts to be tight to the structure.
The tube is unable to pass through the fitting.
Should this be required then the base must be reamed out.
If the base is reamed out the bottom fixing will become redundant.
| Nominal Bore of the Pipe | |||
| Fitting | Tube Size Outside Diameter | Metric | Imperial |
| 20 | 26.9mm | 20 | 3/4" |
| 25 | 33.7mm | 25 | 1" |
| 32 | 42.4mm | 32 | 1 1/4" |
| 40 | 48.3mm | 40 | 1 1/2" |
| 50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing designation ofPipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm
Pleaserefer to our Sizeguide before ordering
