Pipe Clamps Galv Offset Side Fixing - 145

Pipe Clamps Galvanised Non-Structural Offset Side Fixing Palm - 145 

Non Structural offset side palm base fixing for fixing guardrailing to walls, steps, ramps, etc.
The tube is unable to pass through this fitting as supplied, should this be required then the base must be reamed out.
Access to the top fixing is restricted. It is recommended that a threaded stud is fixed first with a maximum projection of 25mm.

Pipe Clamp Sizing Table
 Nominal Bore of the Pipe
FittingTube Size
Outside Diameter
3242.4mm321 1/4"
4048.3mm401 1/2"

Much confusion is caused by the sizing and designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm.
Please refer to our Sizeguide before ordering