Pipe Clamps Galv Locking Collar - 179

Pipe Clamp Size 1 Locking Collar 179-1 Galvanised
£1.16 (exc VAT)

Pipe Clamp Size 2 Locking Collar 179-2 Galvanised
£1.02 (exc VAT)

Pipe Clamp Size 3 Locking Collar 179-3 Galvanised
£1.12 (exc VAT)

Pipe Clamp Size 4 Locking Collar 179-4 Galvanised
£1.23 (exc VAT)

Pipe Clamp Size 5 Locking Collar 179-5 Galvanised
£2.69 (exc VAT)
Pipe Clamps Galvanised Locking Collar - 179
A locking collar used as extra support for a Pipeclamp fitting on structures where the slip load on the grubscrew may be exceeded i.e. racking.
Can also be used to support a Pipeclamp fitting that is required to be left undone. i.e. a gate hinge.
Nominal Bore of thePipe | |||
Fitting | Tube Size Outside Diameter | Metric | Imperial |
20 | 26.9mm | 20 | 3/4" |
25 | 33.7mm | 25 | 1" |
32 | 42.4mm | 32 | 1 1/4" |
40 | 48.3mm | 40 | 1 1/2" |
50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing and designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm.
Please refer to our Sizeguide before ordering