Pipe Clamps Galv Inline Internal Tube Connector - 150

Pipe Clamp Size 2 Internal Tube Connect 150-2 Galv Inline
£1.72 (exc VAT)

Pipe Clamp Size 3 Internal Tube Connect 150-3 Galv Inline
£2.22 (exc VAT)

Pipe Clamp Size 4 Internal Tube Connect 150-4 Galv Inline
£2.72 (exc VAT)
Pipe Clamps Galvanised Inline Internal Tube Connector 150
An inline internal tube connector for joining two tubes of the same diameter. This fitting can only be used with 3.2mm wall thick tube. This fitting is not recommended for high or tensile load applications.
Nominal Bore of the Pipe | |||
Fitting | Tube Size Outside Diameter | Metric | Imperial |
20 | 26.9mm | 20 | 3/4" |
25 | 33.7mm | 25 | 1" |
32 | 42.4mm | 32 | 1 1/4" |
40 | 48.3mm | 40 | 1 1/2" |
50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing and designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm.
Please refer to our Sizeguide before ordering