Pipe Clamps Galv Hook - 182

Pipe Clamps Galvanised Hook - 182

Chain hook. Used to locate chains across openings.
Not ideal for permanent chain location.
Recommended that one end of the chain is fixed using a Pipeclamp fitting reference 173M and held in place with a nut and bolt.

Pipe Clamp Sizing Table
 Nominal Bore of the Pipe
FittingTube Size
Outside Diameter
3242.4mm321 1/4"
4048.3mm401 1/2"

Much confusion is caused by the sizing and designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm.
Please refer to our Sizeguide before ordering