Pipe Clamps Galv Gate Eye - 138
Pipe Clamp Size 1 Gate Eye 138-1 Galvanised
£1.95 (exc VAT)
Pipe Clamp Size 2 Gate Eye 138-2 Galvanised
£1.52 (exc VAT)
Pipe Clamp Size 3 Gate Eye 138-3 Galvanised
£1.62 (exc VAT)
Pipe Clamp Size 4 Gate Eye 138-4 Galvanised
£1.77 (exc VAT)
Female Gate Eye Section of a 2 part Pipe Clamp Gate Hinge 138
Used in conjunction with Pipeclamp fitting reference 140
| Nominal Bore of the Pipe | |||
| Fitting | Tube Size Outside Diameter | Metric | Imperial |
| 20 | 26.9mm | 20 | 3/4" |
| 25 | 33.7mm | 25 | 1" |
| 32 | 42.4mm | 32 | 1 1/4" |
| 40 | 48.3mm | 40 | 1 1/2" |
| 50 | 60.3mm | 50 | 2" |
Much confusion is caused by the sizing designation of Pipeclamps.
All inch sizes referred to are Nominal Bore sizes and relate to the Nominal {not actual} bore of the pipe or tube used.
For example: The 1" PIPECLAMP will fit a 1" or 25mm Nominal Bore Pipe or tube with an OD of 1 11/32" or 33.7mm
Please refer to our Sizeguide before ordering
