MDPE Blue Water Pipe BS6572 Kitemarked EN12201
MDPE Polyethylene PE80 Water Supply Pipe in outside diameters (O.D.) of 25mm, 32mm 50mm, 63mm available in 12 Bar Pressure for Drinking Water Supply.
20mm Blue MDPE PE80 pipe is 16 bar Pressure Rated

All WRAS Approved MDPE pipe is available in lengths of 25m, 50m, 100m and 150m

Blue MDPE can be used for potable water underground as service connections from distribution mains to individual properties and may also be used for above ground services if the pipes are installed within protective ducts
Commonly connected to Snaplock Couplings,  Polypropylene FittingsHostails And Connectors in brass, stainless steel & plastic.

MDPE Yellow Gas Pipe PE80
Medium Density Polyethylene Yellow Gas Pipe
Maximum Gas Pressure Ratings for PE80 are as follows:-
SDR11 - 5.5 bar
SDR13.6 - 4.0 bar
SDR17.6 - 3.0 bar

MDPE (Alkathene) Black PE80
PE80 MDPE pipe is suitable for mains water applications and is used for potable water above ground installations where light ingress may occur.
Other applications are irrigated land systems and light industrial use.
For Potable water use Philmac fittings are recommended.
MDPE Black pipe is available in outside diameters (O.D.) of 20, 25, 32, 50, 63mm. and in lengths of 25m, 50m, 100m and 150m

PLEASE NOTE : MDPE Pipe is coiled under tension and strapped accordingly. Care should be taken when handling PE pipe supplied in coils.