Calpeda Turbomat 1/1 Pressure Booster 400v

Calpeda Turbomat 1/1 Pressure Booster 400v
Construction
Compact, automatic autoclaves for household water feeding, consisting of:
- close-coupled pump
- membrane tank
- pressure switch
- pressure gauge (excluding MINIMAT)
- special connector
- flexible pipe for systems with pump over the vessel
Applications
For drawing water out a well.
As pressure boosting pump for centralwater systems with thermal protector (follow specifications if increasing network pressure).
Operating
According to the decrease or increase of pressure, the pressure switch determines when the pump will start or stop.
Motor
2-pole induction motors, 50 Hz, n=2900 1/min.
Three-phase 230/400V ± 10%.
Single-phase 230V ± 10%, with thermal protector.
Insulation class F.
Protection IP54.
Constructed in accordance with: IEC 34.
Other voltages and frequencies on request.
Vessels
Cylindrical with capacity 20 litres, membrane type, air preordaining with pressure 0,2 bar below the minimum pressure switch rating.