Tracpipe Gas Pipe Cut Lengths
TRACPIPE: Multiples of 5 metres are not cut into 5 metre lengths but supplied as one single length
i.e. If you order 2 x 5 metres, you will receive one 10 metre length, 5 x 5 metres = one 25 metre length, etc
We are a leading UK TracPipe supplier. TracPipe ® is a flexible stainless steel semi-rigid gas piping to BS 7838 suitable for natural gas, propane or butane installations.
Satisfies the requirements of BS 6891 for sleeved pipe
TracPipe ® bends by hand, needsvery limited joining and dramatically reduces installation time with speed, flexibility and ease of handling and fitting. TracPipe terminates with BSP male TracPipe Autoflare Fittings
TracPipe's full range of sizes and proven reliability make it the first choice at all residential, commercial, and industrial job sites. TracPipe ® is manufactured from a stainless steel core, with a smoke and fire retardant yellow polyethylene cover. It is designed to replace traditional copper and steel rigid gas pipework, from meter to appliance.
Note on Tape Wrapping: Care must be taken to ensure that no stainless steel pipe is visible. Any portions of exposed stainless steel behind the fitting nut shall be wrapped with self-bonding TracPipe Silicone Tape TracPipe P/N FGP-915-10H-12, (25 mm wide), or FGP-915-20H12PO, (50 mm wide). This will reduce the possibility of later corrosive attack.
Please Note: TracPipe cut lengths are Non-returnable Items
TracPipe gas pipe and TracPipe gas pipe fittings should only be installed by Gas Safe registered engineers