Polypipe 15mm x 25m Coil Barrier Pipe PB2515B

Polypipe 15mm x 25m Coil Barrier Pipe PB2515B

Stock Code: UFCHP0990
Prod. Code: PB2515B
£32.78 (exc VAT) per coil
£39.34 (inc VAT)

You Save -55%

£39.34 (inc VAT) 2021-10-23 "newCondition" GBP UFCHP0990 InStock
Quantity:
-
+
UFCHP0990 UFCHP0990 Polypipe 15mm x 25m Coil Barrier Pipe PB2515B 2021-10-26

Polypipe Underfloor Heating Barrier Pipe Coil 15mm x 25m UFCH

    Pack Qty: 1
    Pack Thickness mm: 560
    Pack Width mm: 560
    Pack Length mm: 90
    Manufacturer: POLYPIPE BUILDING PRODUCTS
    Brand Name: POLYPIPE
    Material: POLYBUTYLENE
    Push Fit: YES
    Kitemark: KM 38148
    BBA Certification: 00/3699
    Fire Rating (hrs): 0

How to Install Polypipe Underfloor Heating Pipe (pdf)

Benefits
One step joint process for faster installation times and reduced costs
Strong joint integrity from the high performance stainless steel grab rings
The joint canonly be disassembled by demounting, reducing potential for tampering
Polyplumb fittings are also used in all polypipe underfloor heating system

Size and Suitability
Length: 25m
Outside Diameter: 15mm
Material: Polybutylene

Suitable in both hard and soft water areas.
Approval
Barrier Pipes are tested DIN 4726 and DIN 4727
Manufactured in accordance with BS EN ISO 9002 (BSI registered firm Certificate FM00318)
WRAS approved
KIWA/KOMO approved (Certificate numbers K14341, 14342 and 14343)
BBA Certified - Polyplumb plybutylene barrier pipe, fittings and accessories are covered by BBA CertificateNumber 00/3699.
Strength
The system is suitable for use in working applications up to 12 bar / 20 degrees centigrade (6 bar / 90 degrees centrigrade). Pipes are suitable for bending to a radius of 12 x diameter when unsupported or 8 x diameter when supported. Connections and fittings are tested tooBS 7291: Class S for thermal cycling test, long term pressure tests, rapid pressure test and pull-out strength.
System MalfunctionTemperature
Polyplumb pipes and fittings are tested to BS [email protected] Parts 1 and 2, which incorporates a pressurised thermal cycling test and a test regime at temperatures of 114 degrees centigrade and 3.5 bar pressure for 1,000 cycles at a duration of 30 minutes per cycle.
Gases
The polyplumb system is not suitable for the transportation of gases. Standard Polyplumb pipe is Oxygen permeable and is suitable for all domestic waterand heating installations. Polypipe recommends that corrosion inhitors are introduced to, and maintained in, all heating systems, whether they use standard or barrier pipe. Due to the long pipe runs used in floor central heating systems we recommend barrier pipe is used throughtout UFCH applications to minimise the potentialfor Oxygen ingress into the system.
Water
The polybutylene material used in Polyplumb pipes and fittings is WRC / WRAS approved. It is resitant to the build-up of scale. Short term chlorination for disinfection of supply pipe work and normal levels of chlorine in UK domestic water supplies will not have an adverse effect on Polyplumb. Polyplumb is not suitable, however, for systems that carry a high concentration of chlorine, eg suppliestoswimming pools etc.
Light
Polyplumb pipe and fittings should be protected from UV light. Standard decorating paints form adequate protection. Polyplumb pipe insulation forms adequate protection for externaluse.
Acoustic
The polyplumb system gives better performance than rigid pipe systems in terms of low noise transmissionand low water hammer effect
Electrical
As Polyplumb pipe doesnot conduct electricity, installations generally require less equipotential bonding than metal systems. Both the IEE and the IoP give guidance on the eat

Underfloor HeatingBarrier Pipe15mm x 25mPolyfit
Used ForUnderfloor Heating
Product TypeBarrier Pipe
Sub Type15mm x 25m
brand Polyfit

Click on any of the following links to download the file.

There are no reviews for this product yet. Be the first to add one!