TracPipe 5 metre Flexible Gas Pipe and Tape Pack 40mm

TracPipe 5 metre Flexible Gas Pipe and Tape Pack 40mm

Stock Code: TRACBFGP4005
Prod. Code: FGP-40-05
£141.21 (exc VAT) per each
£169.45 (inc VAT)

You Save -38%

£169.45 (inc VAT) 2022-06-02 "newCondition" GBP TRACBFGP4005 InStock
TRACBFGP4005 TRACBFGP4005 TracPipe 5 metre Flexible Gas Pipe and Tape Pack 40mm

TracPipe 5m Flexible Gas Pipe and Tape Pack 40mm

Tracpipe Flexible Gas Pipe Coil & Tape Pack DN40 x 5mtr consisting of:-
5 metres x 40mm Tracpipe ® flexible gas pipe
2 metres 25mm silicone tape

Tracpipe ® 15m x 40mm Flexible Gas Pipe and tape packs are manufactured to specifically replace traditional gas pipework in domestic and small commercial installations.

When deciding on the correct size of Tracpipe gas installation pipework, it is recommended practice to allow a maximum design pressure loss between the point of supply and the appliance connection points.
Sometimes called Boiler Replacement Kits - there are actually three types of kits; this kit consists of a length of TracPipe and Silicone Tape only

Benefits to the installer
Tracpipe provides a major benefit over traditional rigid piping methods by significantly reducing installation & labour time
Tracpipe can be bent by hand so no bend joints are required
Light weight compact packs are easy to transport
No threading, welding or hot-work is needed and no special tools are required.
Kits can be used on natural gas or butane gas

Jointing flexible gas pipe to fittings
Each AutoFlare fitting uses back nut and 2 split rings.
Simply slide the nut back over the cut pipe end, the two split rings will be aligned with the first corrugation of the pipe. Slide the nut forward to trap the split rings.
Align the AutoFlare fitting with the back nut and hand tighten the threads then use an appropriate spanner size to tighten the fitting until it is tight.

Extra Tracpipe Autoflare Fittings
and Tracpipe Autoflare Straight Coupling Fittings are available together with a TracPipe Cutter

BSi Kitemark
All Autoflare tees are manufactured in brass they are BS 7838 Approved, Tested by Advantica and BSI Kitemarked they conform to all Gas Industry Standards in the U.K.

Gas Safe Register Please note: Tracpipe gas pipe and Tracpipe gas pipe fittings should only be installed by Gas Safe registered engineers

TracPipe 40mm Sizing Table
  TracPipe 40mm Tube Dimensions
Size (mm) DN 40
Nominal ID (mm) 38.7
Jacket OD (mm) 48.8
Bend Radius (mm) Minimum 76
Recommended 127
Natural Gas Propane ButaneStainless Steel Convoluted HoseGas Hose5 metres40mmTracpipeBS Kitemark AdvanticaBS 7838:1996
Used ForNatural Gas Propane Butane
Product TypeStainless Steel Convoluted Hose
Sub TypeGas Hose
Length5 metres
brand Tracpipe
Approved ByBS Kitemark Advantica
StandardsBS 7838:1996

There are no reviews for this product yet. Be the first to add one!