TracPipe 15m Flexible Gas Pipe Tape Pack 15mm

TracPipe 15m Flexible Gas Pipe Tape Pack 15mm

Stock Code: TRACBFGP1515
Prod. Code: FGP-15-15
MPN: 5051303000742
£115.15 (exc VAT) per each
£138.18 (inc VAT)

You Save -38%

£138.18 (inc VAT) 2021-10-27 "newCondition" GBP TRACBFGP1515 InStock
Quantity:
-
+
TRACBFGP1515 TRACBFGP1515 TracPipe 15m Flexible Gas Pipe Tape Pack 15mm 2021-10-30

TracPipe 15m Flexible Gas Pipe and Tape Pack 15mm

Tracpipe Flexible Gas Pipe Coil & Tape Pack DN15 15m consisting of:-
15 metres x 15mm Tracpipe® flexible semi-rigid gas pipe
2 metres 25mm silicone tape

Tracpipe ® 15m x 15mm Flexible Gas Pipe and tape packs are manufactured to specifically replace traditional gas pipework in domestic and small commercial installations.
Sometimes called Boiler Replacement Kits -there are actually three types of kits; this kit consists of a length of TracPipe and Silicone Tape only

When deciding on the correct size of Tracpipe gas installationpipework, it is recommended practice to allow a maximum design pressure loss between the point of supply and the appliance connection points.

Benefits to the installer
Tracpipe provides amajor benefit over traditional rigid piping methods by significantly reducing installation & labour time
Tracpipe can be bent by hand so no bend joints are required
Light weight compact packs are easy to transport
No threading, welding or hot-work is needed and no special tools are required.
Kits can be used on natural gas or butane gas

Jointing flexible gas pipe to fittings
Each AutoFlare fitting uses back nut and 2 split rings.
Simply slide the nut back over the cut pipe end, the two split rings will be aligned with the first corrugation of the pipe. Slide the nut forward to trap the split rings.
Align the AutoFlare fitting with the back nut and hand tighten the threads then use an appropriate spanner size to tighten the fitting until it is tight.

Extra Tracpipe Autoflare Fittings and Tracpipe Autoflare Straight Coupling Fittings are available together with a TracPipe Cutter

BSi Kitemark
All Autoflare tees are manufactured in brass they are BS 7838 Approved, Tested by Advantica and BSI Kitemarked they conformto all Gas Industry Standards in the U.K.

Gas Safe RegisterPlease note: Tracpipe gas pipe and Tracpipe gas pipe fittings should only be installed by Gas Safe registered engineers

TracPipe DN15 Sizing Table
  TracPipe DN15 Tube Dimensions
Size (mm) DN 15
Nominal ID (mm) 15.2
Jacket OD (mm) 22.1
Bend Radius (mm) Minimum 19.1
Recommended

76

Natural Gas Propane ButaneSemi Rigid Gas PipePipe & Tape Pack15m15mmTracpipeBS Kitemark AdvanticaBS 7838:1996
Used ForNatural Gas Propane Butane
Product TypeSemi Rigid Gas Pipe
Sub TypePipe & Tape Pack
Length15m
Size15mm
brand Tracpipe
Approved ByBS Kitemark Advantica
StandardsBS 7838:1996

There are no reviews for this product yet. Be the first to add one!