Tracpipe AutoFlare 28mm x 1 Inch BSP

Tracpipe 28mm x 1 BSP Male Gas Pipe Connector

Stock Code: TRAC4030
Prod. Code: FGP-FST-28
MPN: 5051303000032
£22.84 (exc VAT) per each
£27.41 (inc VAT)

You Save -48%

£27.41 (inc VAT) 2022-07-14 "newCondition" GBP TRAC4030 InStock
TRAC4030 TRAC4030 Tracpipe 28mm x 1 BSP Male Gas Pipe Connector

Tracpipe 28mm x 1 Inch BSP Male (ISO 7-1 'R')

These 28mm Tracpipe BSP Male Gas pipe Fittings are designed to connect to 28mm Tracpipe flexible gas pipe as well as connect to traditional gas pipe fittings in iron, malleable, steel, copper etc. No tape or jointing compounds are needed on the fitting and the fittings require no special tools or heat to form a gas safe joint. Silicone tape is used however to ensure there is no corrosion the stainless steel pipe. The fittings are suitable for natural gas, propane or butane up to a working pressures of 75mbar.

The fittings are manufactured in brass and they are BS 7838 Approved, Tested by Advantica and BSI Kitemarked, they conform to all Gas Industry Standards in the U.K.

All of the tracpipe autoflare fittings are easy to use as they are self-flaring, self-piloting joint seals that tighten with a normal spanner. At correct torques they form safe, gas-tight connections. Tracpipe Autoflare Fittings terminate and connect both Tracpipe Flexible Gas Pipe Full Coils and Tracpipe Cut Lengths

Jointing flexible gas pipe with autoflare fittings
Each AutoFlare fittinguses back nut and 2 split rings.
Simply slide the nut back over the cut pipe end, the two split rings will be aligned with the first corrugation of the pipe.
Slide the nut forward to trap the split rings.
Align theAutoFlare fitting with the back nut and hand tighten the threads then use an appropriate spanner size to tighten the fitting until it is tight.
Torque should be applied similar to that used when as making up a flared pipe joint.

Natural Gas Propane ButaneSemi Rigid Gas PipeGas ConnectorBrassCompressionTracpipeBS Kitemark Advantica
Used ForNatural Gas Propane Butane
Product TypeSemi Rigid Gas Pipe
Sub TypeGas Connector
Material TypeBrass
Connection TypeCompression
brand Tracpipe
Approved ByBS Kitemark Advantica

Click on any of the following links to download the file.

There are no reviews for this product yet. Be the first to add one!