Grundfos UPS 40-185 40mm Flanged Central Heating Pump

Grundfos UPS 40-185 Pump 240v 40mm Flanged

Stock Code: GRUNP3132
Prod. Code: 96430299
£1,307.00 (exc VAT) per EACH
£1,568.40 (inc VAT)

£1568.40 (inc VAT) 2021-03-09 "newCondition" GBP GRUNP3132 InStock
GRUNP3132 GRUNP3132 Grundfos UPS 40-185 Pump 240v 40mm Flanged 2021-03-12

The Grundfos UPS 40-185 is a 40mm flanged single phase pump specifically designed for central heating systems.
The motor is an asynchronous squirrel-cage motor in conformity with the EMC directive.
Standards used: EN 61 000-6-2 and EN 61 000-6-3.
The terminal box and the motor-pump unit have been wet-tested to EN 60 335-1: 1994 and EN 60 335-2-51: 1997.
The terminal box is easily accessible and has functional cable connecting terminals. The cable entry is tight and has a built-in cable relief. The cable entry of singlephase motors can be pushed out of its guide to facilitate the correct fitting of the cable.
The motor incorporates thermal overload or impedance protection. Therefore, no external motor protection is required.

Pumped liquids
Depending on type, Grundfos circulator pumps are designed for the following liquids:
- thin, clean, non-aggressive and non-explosive liquids without solid particles or fibres
- cooling liquids, not containing mineral oil domestic hot water softened water.
If the circulator pump is used for a liquid with a viscosity higher than water, the hydraulicperformance of the pump will be reduced. When selecting a pump, the viscosity of the pumped liquid should be taken into consideration.

Maximum system pressure
Pump with unions (PN 10): 1.0 MPa (10 bar)
Flanged pump (PN 6/10): 0.6/1.0 MPa (6/10 bar)
Pump with Grundfos flanges: 1.0 MPa (10 bar)

Performance Range

Grundfos UPS Performance range chart

Grundfos PumpsHome HeatingGrundfos
ManufacturerGrundfos Pumps
Used ForHome Heating

Click on any of the following links to download the file.

There are no reviews for this product yet. Be the first to add one!